When you think of alarming your home, you have two specific types of systems available. There is the wired home security system and wireless security system.

Moreover, in some cases use a combination of both types of alarm system installed in your home. Of course, both pros and cons of both types of systems.

Let’s look at each option providing you with the information you need to determine what type of security alarm system you may be tempted to buy for your home.

With a wired home security system, are threads of the keyboard and control panel to sensors throughout the house, including windows, doors, cameras and motion detectors.

The wires are usually concealed behind walls, baseboards and under floors or carpets. As you can imagine, quite a few of the installation when choosing this type of alarm. One of the advantages over the wireless system is that a wired setup is not susceptible to interference.

Open-loop and Closed-Loop Home Alarm Setup

The setup around a wired home security system is such that either a closed-loop or open-loop setup. Let’s look at the closed-loop setup first. When a door or window is a magnet separated from the magnetic switch opens, causing the alarm. This is the setup most houses use.

The open-loop setup, where a window or door is a magnetic connection which closes the alarm open.

Most security professionals believe that the closed-loop configuration is best due to the fact that if an intruder tries to cut wire without breaking the circuit and trigger the alarm.

The wireless alarm system uses radio signals rather than wires to communicate with the control and security devices.

A wireless system is much easier to install because there are no wires to hide. There is a limit to how far the signal it sends in the house. In addition, interference with other devices in the home.